Response of “Alamo” switchgrass tissue chemistry and biomass to nitrogen fertilization in West Tennessee,USA

Switchgrass (Panicum virgatum) is a perennial, warm-season grass that has been identified as a potential biofuel feedstock over a large part of North America. We examined above- and belowground responses to nitrogen fertilization in “Alamo” switchgrass grown in West Tennessee, USA. The fertilizer study included a spring and fall sampling of 5-year old switchgrass grown under annual applications of 0, 67, and 202 kg N ha^?1 (as ammonium nitrate). Fertilization changed switchgrass biomass allocation as indicated by root:shoot ratios. End-of-growing season root:shoot ratios (mean ± SE) declined significantly (P ≤ 0.05) at the highest fertilizer nitrogen treatment (2.16 ± 0.08, 2.02 ± 0.18, and 0.88 ± 0.14, respectively, at 0, 67, and 202 kg N ha^?1). Fertilization also significantly increased above- and belowground nitrogen concentrations and decreased plant C:N ratios. Data are presented for coarse live roots, fine live roots, coarse dead roots, fine dead roots, and rhizomes. At the end of the growing season, there was more carbon and nitrogen stored in belowground biomass than aboveground biomass. Fertilization impacted switchgrass tissue chemistry and biomass allocation in ways that potentially impact soil carbon cycle processes and soil carbon storage.     

Semi-volatile and particulate emissions from the combustion of alternative diesel fuels

Motor vehicle emissions are a major anthropogenic source of air pollution and contribute to the deterioration of urban air quality. In this paper, we report results of a laboratory investigation of particle formation from four different alternative diesel fuels, namely, compressed natural gas (CNG), dimethyl ether (DME), biodiesel, and diesel, under fuel-rich conditions in the temperature range of 800-1200 degrees C at pressures of approximately 24 atm. A single pulse shock tube was used to simulate compression ignition (CI) combustion conditions. Gaseous fuels (CNG and DME) were exposed premixed in air while liquid fuels (diesel and biodiesel) were injected using a high-pressure liquid injector. The results of surface analysis using a scanning electron microscope showed that the particles formed from combustion of all four of the above-mentioned fuels had a mean diameter less than 0.1 microm. From results of gravimetric analysis and fuel injection size it was found that under the test conditions described above the relative particulate yields from CNG, DME, biodiesel, and diesel were 0.30%. 0.026%, 0.52%, and 0.51%, respectively. Chemical analysis of particles showed that DME combustion particles had the highest soluble organic fraction (SOF) at 71%, followed by biodiesel (66%), CNG (38%) and diesel (20%). This illustrates that in case of both gaseous and liquid fuels, oxygenated fuels have a higher SOF than non-oxygenated fuels.     

Southern Ocean biogeography and taxonomic resolution: what’s in the name?

We examined the taxonomic resolution of zooplankton data required to identify ocean basin scale biogeographic zonation in the Southern Ocean. A 2,154 km transect was completed south of Australia. Sea surface temperature (SST) measured at 1 min intervals showed that seven physical zones were sampled. Zooplankton were collected at a spatial resolution of ~9.2 km with a continuous plankton recorder, identified to the highest possible taxonomic resolution and enumerated. Zooplankton assemblage similarity between samples was calculated using the Bray–Curtis index for the taxonomic levels of species, genus, family, order and class after first log₁₀(x + 1) (LA) and then presence/absence (PA) transformation of abundance data. Although within and between zone sample similarity increased with decreasing taxonomic resolution, for both data transformations, cluster analysis demonstrated that the biogeographic separation of zones remained at all taxonomic levels when using LA data. ANOSIM confirmed this, detecting significant differences in zooplankton assemblage structure between all seven a priori determined physical zones for all taxonomic levels when using the LA data. In the case of the PA data for the complete data set, and both LA and PA data for a crustacean only data set, no significant differences were detected between zooplankton assemblages in the Polar frontal zone (PFZ) and inter-PFZ at any taxonomic level. Loss of information at resolutions below the species level, particularly in the PA data, prevented the separation of some zones. However, the majority of physical zones were biogeographically distinct from species level to class using both LA and PA transformations. Significant relationships between SST and zooplankton community structure, summarised as NMDS scores, at all taxonomic levels, for both LA and PA transformations, and complete and crustacean only data sets, highlighted the biogeographic relevance of low resolution taxonomic data. The retention of biogeographic information in low taxonomic resolution data shows that data sets collected with different taxonomic resolutions may be meaningfully merged for the post hoc generation of Southern Ocean time series.     

Heavy metals in potable groundwater of mining-affected river catchments,northwestern Romania

Groundwater, accessed using wells and municipal springs, represents the major source of potable water for the human population outside of major urban areas in northwestern Romania, a region with a long history of metal mining and metallurgy. The magnitude and spatial distribution of metal contamination in private-supply groundwater was investigated in four mining-affected river catchments in Maramureş and Satu Mare Counties through the collection of 144 groundwater samples. Bedrock geology, pH and Eh were found to be important controls on the solubility of metals in groundwater. Peak metal concentrations were found to occur in the Lapuş catchment, where metal levels exceed Dutch target and intervention values in up to 49% and 14% of samples, respectively. A 700 m wide corridor in the Lapuş catchment on either side of the main river channel was identified in which peak Cd (31 μg l⁻¹), Cu (50 μg l⁻¹), Pb (50 μg l⁻¹) and Zn (3,000 μg l⁻¹) concentrations were found to occur. Given the generally similar bedrock geologies, lower metal levels in other catchments are believed to reflect differences in the magnitude of metal loading to the local environment from both metal mining and other industrial and municipal sources. Sampling of groundwater in northwestern Romania has indicated areas of potential concern for human health, where heavy metal concentrations exceed accepted environmental quality guidelines. The presence of elevated metal levels in groundwater also has implications for the implementation of the EU Water Framework Directive (WFD) and achieving ‘good’ status for groundwater in this part of the Danube River Basin District (RBD).     

Optimising the preparation of activated carbon from digested sewage sludge and coconut husk.

Preparation of activated carbon from sewage sludge is a promising way to dispose of sewage sludge as well as to produce a low-cost adsorbent for pollutant removal. This research work aimed to optimise the condition for activated carbon preparation from anaerobically digested sewage sludge with the additive coconut husk. The sewage sludge sample was mixed with the additive coconut husk. The preparation condition variables investigated involved the concentration of the ZnCl2 solutions, heating temperature, dwell time and heating rate in pyrolysis and the mixing ratio of coconut husk to sewage sludge. Surface area, pore size distribution, aqueous phenol adsorption capacity and the production yield of the final products were determined and compared. Experimental results revealed that low concentrations of ZnCl2 solution tended to improve the microporosity of the final product. Heating temperature had a considerable impact on the surface area, pore size distribution and phenol adsorption capacity of the final products, whereas dwell time and heating rate performed comparatively insignificantly. The effect of increasing the mixing ratio of coconut husk to sewage sludge was principally to increase the microporosity of the final products. The activated carbon with the highest BET surface area was produced with the activation of 5 M ZnCl2 solution and, thereafter, pyrolysis at a heating temperature of 500 degrees C for 2 h with a heating rate of 10 degrees C/min. The mixing ratio of 1:4 in terms of coconut husk to sewage sludge based on their dried weights was found to be most cost effective.     

SHOULD DAMS BE MODIFIED FOR THE PROBABLE MAXIMUM FLOOD?1

ABSTRACT: The probable maximum flood (PMF) currently serves as the design standard for many U.S. dams. Floods used for design have increased and currently thousands of dams in the U.S. would be overtopped and possibly fail using the latest calculated PMF at each dam site. Some researchers have suggested that modifying dams to accommodate the PMF could be wasteful. Objections to using the PMF for dam modification include: (1) larger spillway capacity may increase annual downstream flood losses, (2) benefit‐cost ratios may be low, (3) construction accidents associated with dam modification may cause fatalities, and (4) the dollar amount spent to save lives by making dams safer is often very high. Based on these objections, a procedure is presented for evaluating the effectiveness of a proposed dam modification. A change in spillway design policy is recommended. Accepting the status quo at a dam that cannot accommodate the PMF may be the best course of action.     

Sensitivity to assumptions in models of generalist predation on a cyclic prey

Ecological theory predicts that generalist predators should damp or suppress long-term periodic fluctuations (cycles) in their prey populations and depress their average densities. However, the magnitude of these impacts is likely to vary depending on the availability of alternative prey species and the nature of ecological mechanisms driving the prey cycles. These multispecies effects can be modeled explicitly if parameterized functions relating prey consumption to prey abundance, and realistic population dynamical models for the prey, are available. These requirements are met by the interaction between the Hen Harrier (Circus cyaneus) and three of its prey species in the United Kingdom, the Meadow Pipit (Anthus pratensis), the field vole (Microtus agrestis), and the Red Grouse (Lagopus lagopus scoticus). We used this system to investigate how the availability of alternative prey and the way in which prey dynamics are modeled might affect the behavior of simple trophic networks. We generated cycles in one of the prey species (Red Grouse) in three different ways: through (1) the interaction between grouse density and macroparasites, (2) the interaction between grouse density and male grouse aggressiveness, and (3) a generic, delayed density-dependent mechanism. Our results confirm that generalist predation can damp or suppress grouse cycles, but only when the densities of alternative prey are low. They also demonstrate that diametrically opposite indirect effects between pairs of prey species can occur together in simple systems. In this case, pipits and grouse are apparent competitors, whereas voles and grouse are apparent facilitators. Finally, we found that the quantitative impacts of the predator on prey density differed among the three models of prey dynamics, and these differences were robust to uncertainty in parameter estimation and environmental stochasticity.     

Sustainability and the primary extraction industries: theories and practice

This paper reflects on how sustainability is being interpreted both theoretically and in practice for the primary extraction industries. Two contrasting perspectives can be adopted: one states that continued extraction of non-renewable resources is a necessary part of sustainable development, whilst the other states that extraction of these resources must be greatly reduced or even eliminated. It is shown that these different approaches can be traced back to underlying, often unarticulated, assumptions about the acceptability of trade-offs between different societal goals; attitudes towards uncertainties in scientific analysis and the reliability of management systems; and the perceived appropriateness of system boundaries at different conceptual scales. These assumptions are founded in the self-perception of organisations and individuals about their roles in society, and the cultural context within which these organisations and individuals define their raison d'être.     

Relating meteorological variables and trends in motor vehicle emissions to monthly urban carbon monoxide concentrations

A model which quantifies the relationship between the monthly time series for CO emissions, the monthly time series in ambient CO concentration, and meteorologically driven dispersion was developed. Fifteen cities representing a wide range of geographical and climatic conditions were selected. An eight-year time series (1984–1991 inclusive) of monthly averaged data were examined in each city. A new method of handling missing ambient concentration values which is designed to calculate city-wide average concentrations that follow the trend seen at individual monitor sites is presented. This method is general and can be used in other applications involving missing data. The model uses emissions estimates along with two meteorological variables (wind speed and mixing height) to estimate monthly averages of ambient air pollution concentrations. The model is shown to have a wide range of applicability; it works equally well for a wide range of cities that have very different temporal CO distributions. The model is suited for assessing long-term trends in ambient air pollutants and can also be used for estimating seasonal variations in concentration, estimation of trends in emissions, and for filling in gaps in the ambient concentration record.